1. Make your Car AUX sound sytem and Home Theater AV HiFi Surrounding framework move toward becoming bluetooth perfect, get music from Bluetooth empower gadget, for example, For iPhone,For iPad,For iPod,For HTC For Samsung Smart cellphone or Bluetooth PC, Laptop.
2. Just interface this bluetooth sound collector to your line-in or assistant contribution on your speakers, match it to your Bluetooth empowered gadget, and appreciate the remote music insurgency.
3. Regardless of whether you need Bluetooth comfort in your auto, through your home-theater framework, in your kitchen, restroom, or bedroom,etc.
4. Basic operation,3.5mm Male to Male Audio Connector or 3.5mm Male to Male Audio Cable to interface the speakers and the collector.
5. Superior AMP chip,can push the headset,and high-control speaker,applicable to a wide range of speakers
6. Intense bluetooth IC,More more grounded similarity
7. Fueled by implicit battery-powered li-particle battery by means of smaller than expected USB port , long working time and low utilization. (Smaller than usual USB link included)
8. You can play music through your auto stereo and answer telephone call by means of the implicit Mic.
Measurements : 52mm(L) x 21mm(W) x 11mm(D)
Bluetooth v3+EDR, Class 2
Bolster A2DP V1.2 (worked in Mic)
Fueled by USB 5V DC
Worked in receiver
Transmission separations of up to 10M
Bolster A2DP stereo
3.5mm stereo bay attachment
Rest mode for vitality sparing
Bolster Bluetooth sans hands work
Up to 8 hours music playback or nonstop
Remote music collector interfaces with 3.5mm earphone jacks
Use with home stereos/speakers, auto stereos,headphones and so forth.
Step by step instructions to Use:
Power on: Press and hold the ON/OFF catch for 5-7 seconds until the point that you hear a “prepared for associating or a sound”, it will auto interface the telephone which was matched.
Power off: Press and hold the ON/OFF catch for 4-5 seconds until the point that you hear a “Long be or red drove”.
2.Connect the recipient to your speakers
With 3.5mm Male to Male Audio Connector or 3.5mm Male to Male Audio Cable to interface the speakers and the recipient (if no stable, Please ensure it was embedded totally).
(1) Ensure the speakerphone is under OFF mode
(2) Pairing: Press and hold the ON/OFF catch for 7 seconds until the point that you hear the “Prepared for associating or a sound” (when you holding the catch until the point when you hear the voice report “Prepared for interfacing”). The LED pointer will streak among red and blue on the other hand. It is currently prepared for matching.
(3) Activate your cell phone’s Bluetooth capacity and look for accessible Bluetooth gadgets by alluding to your cell phone client manual for points of interest.
(4) Selet “BT310REV or DL-LINK” from the rundown.
(5) When paring is finished, the voice report “associated or short bebe” The LED pointer will streak Blue then again.
Perfect With :
For iPhone 3G, 3GS, 4,For 4s, 5, 5c and 5s, 6, 6 Plus
For iPad 1, 2, 3, 4, Air, Mini1 and 2
For Laptop and PC with bluetooth 2.1 or more
For Samsung,For HTC, and so forth, all other Android 2.1 (or more) gadgets with Bluetooth
Advanced mobile phone with Bluetooth 2.1 and above
1 x Bluetooth Music Receiver Built-in Mic
1 x Micro USB Power Cable
1 x 3.5mm Stereo Inlet Socket